BA82 LCD TFT 12.1" (30.7 cm) Flat Panel Display User Manual
BA82 User Manual 3 The Flat Panel Display BA82 General The TFT LCD flat panel display is an XGA-compatible 12.1-inch flat panel display which is abs
4 BA82 User Manual USB Interface A Plug and Play interface (type A) for connecting peripherals during opera-tion, e.g. USB sticks or a keyboard. On
BA82 User Manual 5 Slightly press the module inwards at the left and right hand side (1). Remove the module of the recesses and carefully move it
6 BA82 User Manual Integrated Loudspeakers The two integrated loudspeakers are located at the bottom side of the screen (see arrows).
BA82 User Manual 7 Capacitive Touch Screen General The TFT Touch Screen works according to the principle of a change in analog capacitance. It has
8 BA82 User Manual glass has the same effect as clicking the left mouse button. You only need to apply a little pressure with the fingertip. In this
BA82 User Manual 9 Infrared Touch Screen General The infrared (IR) technology is based on the interruption of a grid of IR light beams before the su
10 BA82 User Manual Breaking through the grid has the same effect as clicking the left mouse button. Therefore, touching the glass is not necessary.
BA82 User Manual 11 Swipe Card Reader (Option) The swipe card reader (MSR Module), that is available as an option, can read three ISO tracks simulta
12 BA82 User Manual Cleaning Instructions In order to guarantee good reading results, the swipe card reader should be cleaned from time to time. Thi
We would like to know your opinion on this publication. Please send us a copy of this page if you have any constructive criticism. We would like to t
BA82 User Manual 13 Keyboard (Option) The keyboard is connected directly to the display via a USB interface. It is fitted to the right-hand side of
14 BA82 User Manual Exchanging the Keys You can remove each of the key caps using the key re-moval device enclosed, pulling the key upwards. Plac
BA82 User Manual 15 Inserting Key Labels Below you will find instructions on how to insert the key labels: Each key should be labeled individually.
16 BA82 User Manual When inserting double keys, please ensure that the actuating cylinder is on the left (horizontally inserted key) resp. on top (
BA82 User Manual 17 Waiter Lock (Option) Each transaction is correctly assigned to the personnel by using the mag-netic key. The magnetic keys are a
18 BA82 User Manual Fingerprint Reader (Option) An optical Scan technique identifies the finger print and assigns it to a per-son entitled to operat
BA82 User Manual 19 lnstalling and Securing Unpacking And Checking the Delivery Unit Unpack the parts and check to see whether the delivery matches
20 BA82 User Manual Loosen the four screws on the screen for approx. 2 mm. Put the screen element on to the base. Tighten monitor and bas
BA82 User Manual 21 Table Mounting Underneath the cable cover there are two holes in the BA82 stand (see arrows) with a diameter of 5.5 mm. The hol
22 BA82 User Manual Mounting the Tube Adapter Take the tube adapter out of the cardboard box and lay it next to the dis-play. For the mounting you n
BA82 LCD TFT 12.1" (30,7 cm) Flat Panel Display User Guide Edition August 2012
BA82 User Manual 23 After cabling the display put on the optional available cover. Put the display with the adapter on the preinstalled tube (
24 BA82 User Manual Connection Bezel The following sockets are located under the bezel of the screen: USB- A PoweredUSB DC Power Jack/12V
BA82 User Manual 25 When laying this cable please mind to slightly clamp it (with a loop) into the strain relief. Lay the cable into the guidance i
26 BA82 User Manual Dual Display Holder (Option) The Dual Display Holder offers the possibility to mount a customer display to the rear side of a ca
BA82 User Manual 27 Mounting Positions There are three mounting positions. Two (at the left and right hand side) can be used to install Magnetic Car
28 BA82 User Manual Ergonomic Terminal Workplace Please observe the following when setting up your terminal workplace: Avoid direct glaring and ref
BA82 User Manual 29 Mounting Peripherals Unpack the parts and check whether the delivery matches the details of the delivery note. Keyboard And Swip
30 BA82 User Manual Loosen the two screws (see arrows) and remove the bracket. Turn the screen around and remove the bezel (see page 19).
BA82 User Manual 31 Loosen the snap arms of the loudspeaker's bezel (see arrows). Flap the bezel downwards. Carefully press out the bli
32 BA82 User Manual Push the bracket (BA82) into the opening of the housing, so that high buckled strapes are fitting in the slits. Tilt dow
All brand and product names mentioned in this document are trademarks of their respective owners. Copyright © Wincor Nixdorf International GmbH, 201
BA82 User Manual 33 You must always discharge yourself (e. g. by touching a grounded object) before mounting. Take care to pull the connector off th
34 BA82 User Manual Push keyboard beneath the bracket. Take care that the upper parts of the hooks (see arrows) are above the plate! And the screws
BA82 User Manual 35 If a device has a second hub, you can connect the keyboard at the next free port on the hub. To do so, release the cable's
36 BA82 User Manual Magnetic Swipe Card Reader The Magnetic Swipe Card Reader can be mounted on either the right or the left side of the screen. The
BA82 User Manual 37 Mounting On the Right Side Loosen the Torx screws and remove the bracket. Turn the screen and remove the cover (see p
38 BA82 User Manual Loosen the snap arms of the loudspeaker's bezel (see arrows). Flap the blind bezel downwards. Carefully press out the bli
BA82 User Manual 39 Push the bracket (BA82) into the opening of the housing, so that high buckled strapes are fitting in the slits. Tilt dow
40 BA82 User Manual You must always discharge yourself (e. g. by touching a grounded object) before mounting. Take care to pull the connector off th
BA82 User Manual 41 Push the reader beneath the bracket so that the screws fit into the keyhole and the holder lays under the clamps. Tighte
42 BA82 User Manual If a device has a second Hub, you can connect the swipe card reader at the next free port on the Hub. To do so, release the cabl
Contents Introduction ... 1 From Point-of-Sale To Point-of-Service ...
BA82 User Manual 43 Mounting On the Left Side Proceed as described above ("Mounting on the right side"). Disconnect the cable to connect i
44 BA82 User Manual Flap the loudspeaker's bezel upwards and snap it into place. Mount the monitor's stand. Drop the Cover Remove the cove
BA82 User Manual 45 Waiter Lock The waiter lock can be mounted on either the right or the left side of the screen. The delivery contains the waiter
46 BA82 User Manual Mounting On the Right Side Loosen the Torx screws and remove the bracket (BA83) and put it aside. Remove the bracket. Loose
BA82 User Manual 47 Move the retain plate out of the guide in direction of the arrows and lift it up. Pull the electronic element out of
48 BA82 User Manual Loosen the screws and pull the plug. Turn the screen and remove the cover (see page 19). Loosen the 4 mount-ing scre
BA82 User Manual 49 Unlock the latch of the loudspeaker's bezel (see arrows). Flap the bezel downwards. Carefully press out the blind screen
50 BA82 User Manual Pass the cable through the cable guidance and connect it to the USB inter-face. Put the cable loop into the housing (see big arr
BA82 User Manual 51 Screw electronic and element together and clamp it into the housing until it is engaged. Screw the retain plate at the
52 BA82 User Manual Put the cable of the waiter lock into the housing. Slip the waiter lock on the retain plate and push it backwards. Make sure tha
Waiter Lock (Option) ... 17 Fingerprint Reader (Option) ...
BA82 User Manual 53 Put the housing of the waiter lock on the retain plate and push it until it is engaged. Control the cabling. Flap the l
54 BA82 User Manual Put the housing of the waiter lock on the retain plate and push it until it is engaged. Control the cabling. Flap the loudspeake
BA82 User Manual 55 Fingerprint Reader The fingerprint reader can be mounted on the right or the left side of the screen. The delivery contains the
56 BA82 User Manual Mounting On the Right Side Loosen the Torx screws and remove the bracket (BA83) and put it aside. Remove the bracket. Loose
BA82 User Manual 57 Move the retain plate out of the guide in direction of the arrows and lift it up. Pull the plug (see arrow).
58 BA82 User Manual Turn the screen and remove the cover (see page 19). Loosen the 4 mount-ing screws about 3 mm beneath the cover . Lift up the
BA82 User Manual 59 Carefully press out the blind screen from inside. Pass the cable through the cable guidance and connect it to the
60 BA82 User Manual If you are going to use the USB interface at the backside of the BA82 then connect the fingerprint reader to any free interface
BA82 User Manual 61 Screw the fingerprint reader to the retain plate. Put the housing of the waiter lock on the retain plate and push it until it is
62 BA82 User Manual Put the housing of the fingerprint reader on the retain plate and push it until it is engaged. Control the cabling. Flap the lou
Technical Data BA82 ... 73 Dimensions (mm) ...
BA82 User Manual 63 On Screen Display (OSD) A set of 4 buttons is located at the operator panel module. Menu left righ
64 BA82 User Manual Input SourceThe Input Source indicates the active video channel. analog input (VGA) digital input (DVI)
BA82 User Manual 65 Display Setting brightness sub menu: contrast sub menu: If the contrast is set too high, bright surfaces can no
66 BA82 User Manual Colour Setting The colour setting is only adjustable in the normal running temperature. The display must run at least 20 minutes
BA82 User Manual 67 Sub menu colour temperature RGB Setting manual setting There are 5 basic settings: 4200K 5000K 6500K (setting, for example
68 BA82 User Manual Image Setting (VGA Mode) Auto scaling (auto adjustment) Should the image setting be faulty during the initial operatio
BA82 User Manual 69 Horizontal position sub menu Vertical position sub menu exit sub menu
70 BA82 User Manual Tools Menu Factory setting No reset of Image Setting (Screen width, phase, horizontal/vertical position) After reset t
BA82 User Manual 71 Information about firmware version Exit sub menu Volume Setting volume sub menu exit sub menu
72 BA82 User Manual EXIT OSD
BA82 User Manual 1 Introduction From Point-of-Sale To Point-of-Service With the BA82 you are using a ergonomical and customer-friendly cashier'
BA82 User Manual 73 Technical Data BA82 Dimensions Diagonal Screen size 12.1"(30.7 cm) Active screen size (horizontal x vertical) 246 mm x 184
74 BA82 User Manual Dimensions (mm)
BA82 User Manual 75 Capacitive Touch Screen Resolutions Horizontal 16k Vertical 16k LCD Technology Analog capacitive Surface anti reflection (ca
76 BA82 User Manual MSR Inside Keyboard Number of tracks up to 3 Coding of swipe cards according to ISO 7811-2 Reading speed 10 to 140 cm/sec. MS
BA82 User Manual 77 Screen Driver Installation/ Installation Tool A driver is available for the following operating systems: Windows: Windows XP,
78 BA82 User Manual Programming the Keyboard And MSR Utility KbUtiUSB is used for Programmable Wincor Nixdorf Keyboards with a USB HID interface. Pr
BA82 User Manual 79 Files On the Wincor Nixdorf Internet site you can find the KbUtiUSB package. This package is written in Java and therefore there
80 BA82 User Manual Modus Keyboard and MSR may have two different states: “Default” This is the default state of keyboard and MSR, codes are assig
BA82 User Manual 81 Software Interfaces Keyboard Codes (Standard) (F1) 3B 3B 00 (F9) 43 43 00 (ESC) 01 01 1B (BS) 0E 0E 08 (F2) 3C 3C 00 (F10) 44
82 BA82 User Manual Manufacturer’s Declaration And Approval General Authorization This device complies with the requirements of the di rective 2004/
2 BA82 User Manual Advantages At a Glance Low footprint Autoscaling of the screen Flickerfree and free from radiation Very good contrast rat
BA82 User Manual 83 Tested Safety The BA82 has been awarded the cUL- and UL- symbol. Energy Star The BA82 has been awarded the ENERGY STAR symbol.
84 BA82 User Manual Protect the device from vibrations, dust, moisture and heat, and only transport the device in its original packaging (to prote
BA82 User Manual 85 For further information of the stipulation look at your contract. All parts of the product which are subject to wear and tear ar
86 BA82 User Manual time, but take advantage of the environmentally smart, up-to-date recy-cling methods! Please contact your competent branch or th
BA82 User Manual 87 Abbreviation Index CE European Symbol of Conformity cUL Canadian Registration (Recognized by UL) DIN Deutsche Industrie Nor
Wincor Nixdorf International GmbH D-33094 Paderborn Order No. / Bestell-Nr.: 01750158764H
Kommentare zu diesen Handbüchern