Wincor Nixdorf BEETLE AT COM Board Bedienungsanleitung PDF herunterladen (Seite 21)

BEETLE /M-II plus (BOS) User Manual 15

With onboard RAID Controllers

HDD/SSD 

right LED flashs

orange

read and write access to

HDD/SSD

left LED lights orange stand by mode

POWER 

left diode lights green the device is switched on

HDD/SSD 

upper LED flashs

orange

read and write access to

HDD/SSD

lower LED lights

green

the storage medium is intact

HDD/SSD 

lower LED lights red

the storage medium is

damaged

The lower LEDs (HDD/SSD 1-3, ) are switched off, if the onboard

controller works under the operating system Linux.

USB (Universal Serial Bus)- A, USB 2.0

You can connect several USB peripheral devices to the USB or powered

USB interface (12V or 24V).

Only connect devices equipped with a shielded cable to the USB-

interface.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 51 52

Keine Kommentare

Wincor Nixdorf BEETLE AT COM Board Bedienungsanleitung Seite 21