Wincor Nixdorf TH320 Spezifikationen PDF herunterladen (Seite 70)

100

101

6-2

MiniScan MS-320X Integration Guide

Note: If after performing these checks the symbol still does not scan,

contact your distributor or call the Symbol Support Center. See page

xiii for the telephone number.

Scanner cannot read the

bar code

Interface/power cables are loose. Re-connect loose cables.

Scanner is not programmed for

the correct bar code type.

Make sure the scanner is

programmed to read the type of bar

code to be scanned.

Try scanning other bar code(s) and

other bar code types.

Incorrect communication

parameters.

Set the correct communication

parameters (baud rate, parity, stop

bits, etc.)

Bar code symbol is unreadable. Check the symbol to make sure it is

not defaced. Try scanning similar

symbols of the same code type.

Inappropriately hot environment. Remove the scanner from the hot

environment, and allow it to cool

down.

Laser activates, followed by

a beep sequence.

Beeper is configured. Refer to Table 1-1 on page 1-8 for

beeper indication descriptions.

Scanner configured to USB

host and does not scan

(MS-3207 only).

Incorrect trigger mode selected. Unplug scanner from USB host.

Present Continuous Scan Mode bar

code and plug unit in. Upon power

up the MS-3207 scans briefly,

decodes, and switches to

continuous trigger mode.

Problem Possible Cause Possible Solutions

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 384 385

Kommentare zu diesen Handbüchern

Keine Kommentare

Wincor Nixdorf TH320 Spezifikationen Seite 70

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen Wincor Nixdorf TH320