Wincor Nixdorf TH320 Spezifikationen Seite 87
- Seite / 385
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
7-17
Parameter Menus
Triggering Modes
Parameter # 8Ah
Choose one of the options below to trigger the scanner. Bar codes and option numbers are
on the following page.
• Level - A trigger pull activates the laser and decode processing. The laser remains
on and decode processing continues until a trigger release, a valid decode, or the
Laser On Time-out is reached.
• Pulse - A trigger pull activates the laser and decode processing. The laser remains
on and decode processing continues until a valid decode or the Laser On Time-out
is reached.
• Continuous - The laser is always on and decoding.
• Blinking - This trigger mode is used for triggerless ScanStand operation. Scanning
range is reduced in this mode. This mode cannot be used with scanners that
support an aim mode.
• Host - A host command issues the triggering signal. The scanner interprets an
actual trigger pull as a Level triggering option.
- MiniScan MS-320X 1
- Integration Guide 1
- 72-58810-02 3
- Revision A 3
- October 2003 3
- Contents 5
- Chapter 5. Scanning 6
- Chapter 7. Parameter Menus 7
- Chapter 13. Mounting Template 12
- Glossary 12
- About This Manual 13
- Notational Conventions 14
- Related Documents 14
- Service Information 14
- Symbol Support Center 15
- Business Partner for service 18
- Chapter 1 19
- Introduction 19
- Typical Applications 20
- Block Diagram 21
- Scanning Patterns 23
- Omnidirectional Scan Pattern 24
- Beeper and LED Definitions 26
- Chapter 2 27
- Installation 27
- Mounting 28
- Assembling the Stand 29
- Mounting the Stand (optional) 30
- Connecting MiniScan 31
- 1 - Ground (Sleeve) 32
- 2 - Vcc (Middle Contact) 32
- 3 - Trigger (Tip) 32
- Mechanical Drawing 33
- Location and Positioning 35
- Constants B A 36
- MS-320x 1.93 34° 36
- Conveyor Applications 38
- Scan Beam 39
- W=Symbol Width 39
- F=Field Width 39
- V = (R x H) / N 40
- H=Symbol Height 40
- Accessories 41
- Software Development CD 42
- 123Scan CD 42
- Chapter 3 43
- MS-3204 Specifications 43
- Electrical Interface 44
- Horizontal: ±3.0 45
- MS-3204 Decode Zones 48
- Depth of Field 50
- Usable Scan Length 51
- Chapter 4 53
- MS-3207 Specifications 53
- 7.0 in. (177.8 mm) 58
- MS-3207 Decode Zones 59
- Vcc = 5V 61
- Application Notes 63
- Chapter 5 65
- Scanning 65
- Triggering Options 66
- Pulse Trigger 67
- Blinking 67
- Host Trigger (MS-3204 Only) 67
- Chapter 6 69
- Chapter 7 71
- Default Table 72
- Table 7-1. Default Table 73
- Set Default Parameter 81
- Scanning Options 82
- Beeper Tone 83
- Parameter # 91h 83
- Beeper Frequency Adjustment 84
- Parameter # F0h 91h 84
- Laser On Time 85
- Parameter # 88h 85
- Power Mode 86
- Parameter # 80h 86
- Triggering Modes 87
- Parameter # 8Ah 87
- Scanning Mode 89
- Parameter # 8Dh 89
- Aiming Mode 90
- Parameter # F0h 7Eh 90
- Parameter # E4h, E5h 91
- Timeout Between Decodes 92
- Beep After Good Decode 93
- Parameter # 38h 93
- Transmit “No Read” Message 94
- Parameter # 5Eh 94
- Parameter Scanning 95
- Parameter # ECh 95
- Parameter # 4Eh 96
- Linear Security Level 3 97
- Linear Security Level 4 97
- Bi-directional Redundancy 98
- Parameter # 43h 98
- Enable/Disable UPC-A 99
- Parameter # 01h 99
- Enable/Disable UPC-E 100
- Parameter # 02h 100
- Enable/Disable UPC-E1 101
- Parameter # 0Ch 101
- Enable/Disable EAN-8 102
- Parameter # 04h 102
- Parameter # 03h 103
- Enable/Disable EAN-13 103
- Enable/Disable Bookland EAN 104
- Parameter # 53h 104
- UPC/EAN Coupon Code 105
- Parameter # 55h 105
- Decode UPC/EAN Supplementals 106
- Parameter # 10h 106
- Parameter # 50h 108
- Transmit UPC-A Check Digit 109
- Parameter # 28h 109
- Transmit UPC-E Check Digit 110
- Parameter # 29h 110
- Transmit UPC-E1 Check Digit 111
- Parameter # 2Ah 111
- UPC-A Preamble 112
- Parameter # 22h 112
- UPC-E Preamble 113
- Parameter # 23h 113
- UPC-E1 Preamble 114
- Parameter # 24h 114
- Convert UPC-E to UPC-A 115
- Parameter # 25h 115
- Convert UPC-E1 to UPC-A 116
- Parameter # 26h 116
- EAN Zero Extend 117
- Parameter # 27h 117
- UPC/EAN Security Level 118
- Parameter # 4Dh 118
- UPC/EAN Security Level 2 119
- UPC/EAN Security Level 3 119
- Linear UPC/EAN Decode 120
- Parameter # 44h 120
- Code 128 121
- Enable/Disable UCC/EAN-128 122
- Parameter # 0Eh 122
- Enable/Disable ISBT 128 123
- Parameter # 54h 123
- Lengths for Code 128 123
- Code 128 Decode Performance 124
- Parameter # 48h 124
- Parameter # 49h 125
- Enable/Disable Code 39 126
- Parameter # 00h 126
- Parameter # 0Dh 127
- Convert Code 39 to Code 32 128
- Parameter # 56h 128
- Code 32 Prefix 129
- Parameter # E7h 129
- Set Lengths for Code 39 130
- Parameter Menus 131
- Code 39 - Length Within Range 131
- Code 39 - Any Length 131
- Parameter # 30h 132
- Transmit Code 39 Check Digit 133
- Parameter # 2Bh 133
- Parameter # 11h 134
- Code 39 Decode Performance 135
- Parameter # 46h 135
- Parameter # 47h 136
- Enable/Disable Code 93 137
- Parameter # 09h 137
- Set Lengths for Code 93 138
- Code 93 - Length Within Range 139
- Code 93 - Any Length 139
- Enable/Disable Code 11 140
- Parameter # 0Ah 140
- Set Lengths for Code 11 141
- Code 11 - Length Within Range 142
- Code 11 - Any Length 142
- Parameter # 34h 143
- Transmit Code 11 Check Digit 144
- Parameter # 2Fh 144
- Interleaved 2 of 5 145
- I 2 of 5 - Any Length 147
- Parameter # 31h 148
- Transmit I 2 of 5 Check Digit 149
- Parameter # 2Ch 149
- Convert I 2 of 5 to EAN-13 150
- Parameter # 52h 150
- Discrete 2 of 5 151
- D 2 of 5 - Any Length 153
- Enable/Disable Codabar 154
- Parameter # 07h 154
- Set Lengths for Codabar 155
- Codabar - Length Within Range 156
- Codabar - Any Length 156
- CLSI Editing 157
- Parameter # 36h 157
- NOTIS Editing 158
- Parameter # 37h 158
- MSI Plessey 159
- Set Lengths for MSI Plessey 160
- MSI Plessey - Any Length 161
- MSI Plessey Check Digits 162
- Parameter # 32h 162
- Parameter # 2Eh 163
- Parameter # 33h 164
- PDF417/MicroPDF417 165
- Enable/Disable MicroPDF417 166
- Parameter # E3h 166
- MicroPDF Performance 167
- Parameter # F0h 65h 167
- Code 128 Emulation 168
- Parameter # 7Bh 168
- RSS Codes 169
- RSS-Limited 170
- Parameter # F0h 53h 170
- RSS-Expanded 171
- Parameter # F0h 54h 171
- Composite (MS-3204 Only) 172
- Composite CC-A/B 173
- Parameter # F0h 56h 173
- Composite TLC-39 174
- Parameter # F0h 73h 174
- UPC Composite Mode 175
- Parameter # F0h 58h 175
- Data Options 176
- Prefix/Suffix Values 178
- Parameter # EBh 180
- Scan Options 182
- *Data As Is 182
- Baud Rate 184
- Parameter # 9Ch 184
- Baud Rate (continued) 185
- Parameter # 9Eh 186
- Parity (continued) 187
- Check Parity 188
- Parameter # 97h 188
- Software Handshaking 189
- Parameter # 9Fh 189
- Host RTS Line State 190
- Parameter # 9Ah 190
- Decode Data Packet Format 191
- Parameter # EEh 191
- Stop Bit Select 192
- Parameter # 9Dh 192
- Intercharacter Delay 193
- Parameter # 6Eh 193
- Host Serial Response Time-out 193
- Parameter # 9Bh 193
- Event Reporting 194
- Decode Event 195
- Parameter # F0h 00h 195
- Boot Up Event 196
- Parameter # F0h 02h 196
- Parameter Event 197
- Parameter # F0h 03h 197
- Macro PDF Features 198
- Transmit Unknown Codewords 200
- Parameter # BAh 200
- Escape Characters 201
- Parameter # E9h 201
- Delete Character Set ECIs 202
- Parameter # E6h 202
- ECI Decoder 203
- Parameter # E8h 203
- Transmit File Name 204
- Parameter # B0h 204
- Transmit Block Count 205
- Parameter # B1h 205
- Transmit Time Stamp 206
- Parameter # B2h 206
- Transmit Sender 207
- Parameter # B3h 207
- Transmit Addressee 208
- Parameter # B4h 208
- Transmit Checksum 209
- Parameter # B6h 209
- Transmit File Size 210
- Parameter # B5h 210
- Parameter # B7h 211
- Last Blocker Marker 212
- Parameter # B9h 212
- Numeric Bar Codes 213
- Numeric Bar Codes (continued) 214
- Chapter 8 217
- RS-232 Default Parameters 218
- Nixdorf Beep/LED Options 219
- Ignore Unknown Characters 219
- RS-232 Host Parameters 220
- RS-232 Interface 221
- RS-232 Host Types 222
- RS-232 Host Types (continued) 223
- *1 Stop Bit 228
- Data Bits 228
- Check Receive Errors 229
- *Check For Received Errors 229
- Hardware Handshaking 230
- Standard RTS/CTS 231
- RTS/CTS Option 1 231
- RTS/CTS Option 2 231
- ACK/NAK with ENQ 233
- XON/XOFF 234
- *Minimum: 2 Sec 235
- RTS Line State 236
- *Host: Low RTS 236
- Beep on <BEL> 236
- *Minimum: 0 msec 237
- Chapter 9 241
- USB Interface (MS-3207 Only) 241
- Connecting a USB Interface 242
- USB Default Parameters 243
- USB Host Parameters 244
- French Windows 245
- German Windows 245
- Spanish Windows 246
- Italian Windows 246
- French Canadian Windows 95/98 246
- Swedish Windows 247
- UK English Windows 247
- Japanese Windows (ASCII) 247
- Portuguese-Brazilian Windows 247
- USB Keystroke Delay 248
- *No Delay 248
- USB CAPS Lock Override 249
- USB Ignore Unknown Characters 250
- Emulate Keypad 251
- Function Key Mapping 252
- Simulated Caps Lock 252
- Convert Case 253
- Chapter 10 255
- 123Scan (MS-3207 Only) 255
- 123Scan Parameter 256
- Chapter 11 257
- Advanced Data Formatting 257
- (MS-3207 Only) 257
- Using ADF Bar Codes 258
- ADF Bar Code Menu Example 259
- Rule 2: The UPC Scanning Rule 260
- Alternate Rule Sets 260
- Default Rules 263
- Special Commands 264
- Save Rule 265
- Quit Entering Rules 266
- Disable Rule Set 267
- Criteria 268
- Code Types (continued) 270
- Code Lengths 271
- Code Lengths (continued) 272
- Specific String at Start 276
- Any Message OK 277
- Numeric Keypad 278
- Rule Belongs To Set 279
- Send Data 281
- Send Data (continued) 282
- Setup Field(s) 284
- Move Cursor 285
- Send Pause 285
- Skip Ahead 286
- Skip Back 287
- Send Preset Value 288
- Modify Data 289
- Pad Data with Spaces 291
- Pad Data with Zeros 295
- Beep Once 299
- Beep Twice 299
- Beep Three Times 299
- Characters) 300
- Keyboard Characters 304
- Send ALT Characters 316
- Send Keypad Characters 320
- Send Function Key 324
- Send Function Key (continued) 325
- Send Right Control Key 330
- Send GUI Y 336
- Send GUI Z 336
- Turn On/Off Rule Sets 337
- Alphanumeric Keyboard 338
- Chapter 12 349
- Simple Serial Interface (SSI) 349
- (MS-3204 Only) 349
- Revision String 350
- SSI Commands Not Supported 350
- Chapter 13 351
- Mounting Template 351
- Appendix A 353
- ASCII Character Set 353
- USB ASCII Character Set 359
- 7016 Down Arrow 369
- 7017 Left Arrow 369
- 7018 Right Arrow 369
- Glossary-2 372
- Glossary-3 373
- Glossary-4 374
- Glossary-5 375
- Glossary-6 376
- Numerics 377
- Tell Us What You Think 383
- Revision A — October 2003 385
Verwandte Produkte und Handbücher für Drucken & Scannen Wincor Nixdorf TH320
(46 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 1.691 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern